Question(s):
This document will try to address the following questions:
- What ports does LANDesk Management Suite use?
- What ports need to be opened in my firewall?
- What port(s) does component X use?
- Does LANDesk have a ports list?
- What TCP and UDP Ports Must be Open on a Linux Agent's Firewall?
- Do I need to open my firewall to let ICMP ECHO/ECHO REPLY packages pass?
- Where can I find a network port diagram?
Answer:
ICMP
Quite a few functionalities of LANDesk rely on ping (ICMP ECHO) to probe if the device or server is reachable. Disabling ICMP ECHO within the network might result in loosing LANDesk functions, such as bandwidth awareness or usage of preferred server.
The network port information has been divided into the following sections.
- Core Server
- Agent - Linux
- Agent - Mac
- Agent - Windows
- Management Gateway
- Mobile Device Manager Server
- PXE Representative
- Remote Console
Additionally a graphical representation of the data is attached to this article.
Management Gateway | Port # | Direction | Notes |
---|---|---|---|
TCP | 22 | ![]() ![]() | SSH Administration |
TCP | 25 | ![]() ![]() | Email Notification |
TCP | 80 | ![]() ![]() | Activation, Patching |
TCP | 443 | ![]() ![]() | Administration, Client, Core |
Mobile Device Management Server | Port # | Direction | Notes |
---|---|---|---|
TCP | 80 | ![]() ![]() | (Core Only) |
TCP | 443 | ![]() ![]() | Enrollment |
TCP | 2195 | ![]() ![]() | APNS (Apple) |
TCP | 2196 | ![]() ![]() | APNS (Apple) |
TCP | 5223 | ![]() ![]() | APNS (Apple) |
TCP | 5228 | ![]() ![]() | C2DM (Google) |
PXE Rep | Port # | Direction | Notes |
---|---|---|---|
UDP | 67 | ![]() ![]() | Imaging (PXE Broadcast) |
UDP | 68 | ![]() ![]() | Imaging (PXE) |
UDP | 69 | ![]() ![]() | Imaging (PXE TFTP) |
UDP | 1758 | ![]() ![]() | Imaging (PXE MTFTP) |
UDP | 1759 | ![]() ![]() | Imaging (PXE MTFTP) |
UDP | 4011 | ![]() ![]() | Imaging (PXE Unicast) |